A garage door is something that often goes underappreciated and doesn’t get as much love and attention as they deserve. One of the most common mishaps, when you have already neglected your garage door for too long, is when you need help getting it to open or close properly. A quick call to a reliable 24/7 Emergency Locksmith will solve the problem instantly.
Luckily, a little bit of maintenance at least once a year will stop your door from breaking and leaving you locked in the garage when you’re running late to work. Follow these simple steps to keep your garage door operating smoothly.
Look and listen
The first step to maintaining your garage door is the easiest. Simply open and close your garage door a few times while spending some time looking and listening to the opener. Any problems with your door are often accompanied by jerky movements or strange noises.
Clear tracks
Over time, dirt and dust can accumulate in the garage door tracks. Also, watch out for rust and other debris that can stop your garage door from operating smoothly. Clearing this out is a super quick and easy way to make your door run smoother and ensure its longevity.
Replace rollers
The rollers on the sides of the garage door should be checked regularly, and any cracked or broken roller wheels should be replaced. However, keep all roller wheels at the bottom of the bracket as they are attached to the cable and pulley and should be replaced by a professional.
Lubricate any moving parts
As your door is moving up and down so often, it’s important to make sure any moving parts are well-lubricated with a high-quality spray lubricant. When your garage door isn’t sufficiently lubricated, it will create unnecessary friction and lead to parts wearing out faster.
Tighten up hardware and fasteners
Your door will be opening and closing multiple times a day almost every single day. With all that movement up and down, sometimes the important hardware and fasteners for the door can come loose. Make sure you tighten the door tracks and the brackets holding the door in place. Make sure to check any fixtures, screws, and bolts to ensure they stay tight.
Test the doors balance
If the balance of your door is out, the opener will need to work harder to move the door. The best way to test the balance of your door is to pull the release handle on the automatic opener and lift the door halfway. When sitting halfway, the door should be able to sit there itself without needing you to hold it. If the door is out of balance, you will need to get your springs either adjusted or replaced.
Test the auto-reverse
The auto reverse function on your garage door is an important safety feature, so you should always check to make sure it is working correctly. You can test the pressure sensor with a piece of wood under the door. When you close the door on the piece of wood, once the door touches the wood, it should automatically reopen. If your door fails this test, you should get its auto-reverse feature repaired.
Always remember that faulty garage doors can lead to different safety and security issues. Following these steps will ensure that you are able to correct problems that are just beginning to appear. If none of these can fix your garage door problems, you need to call a professional to help you keep your home safe.
Comments are closed.